|
|
|
Arlon® 1160
|
 Arlon® 1160 is a glass-reinforced version of Arlon 1000. This grade has significantly higher tensile strength, and increased shear strength. Arlon 1160 is often selected when the operating temperature exceeds 300F. The addition of glass raises the HDT and reduces the coefficient of thermal expansion. Other benefits include lower coefficient of friction and improved wear properties. Arlon 1160 and related grades are successfully being used as sealing components, valve seats, bearings, back-up rings, and high temperature insulators.
Availability:
Arlon 1160 is available in custom injection-molded shapes, rods to 3/4", tubes from 1/2" ID to 6" OD (maximum cross-section 7/8"), and discs to 15".
| LITERATURE | TYPICAL PROPERTIES |
Note: Properties of Arlon 1160 are anisotropic and are measured in the axial flow direction of molded test specimens.
|
|