|
|
|
Arlon® 1260
|
 Arlon® 1260 is a carbon-fiber reinforced version of Arlon 1000, and has the highest modulus and tensile strength of all the Arlon grades. Arlon 1260 is often selected by designers requiring a low coefficient of thermal expansion. Tribological properties are also greatly enhanced over Arlon 1000, friction values are reduced and wear properties are improved. The value to Arlon 1260 is best realized in lubricated bearings and/or moist environments.
Availability:
ARLON 1260 is available in custom injection-molded shapes, rods to 5/8", tubes from 1/2" ID to 6" OD, and discs to 15". NOTE: Arlon 1260 is subject to some limitations regarding moldings. Arlon 1260 is not recommended for shapes with a cross-section greater than 5/8".
|
LITERATURE
|
TYPICAL PROPERTIES
|
Note: Properties of Arlon 1260 are anisotropic and are measured in the axial
flow direction of molded test specimens.
| Arlon 1260 Bearing Properties |
| PV Limit @ 100 fpm, 68°F |
3.87 x 105 |
| Dynamic Friction (µ) |
0.16 |
| PV Limit @ 100 fpm, 390°F |
2.35 x 105 |
| Dynamic Friction (µ) |
0.23 |
| PV Limit @ 600 fpm, 68°F |
1.75 x 105 |
| Dynamic Friction (µ) |
0.28 |
| PV Limit @ 600 fpm, 390°F |
2.10 x 105 |
| Dynamic Friction (µ) |
0.25 |
| Arlon 1260 Radial Wear |
Bushing Test - Continuous Rotation
PV - 6,000 (psi fpm) @ 30 fpm, 68°F |
| Wear |
5.0 x 10-5inches/hour |
| Dynamic Friction (µ) |
0.28 |
|
|