FC ADAPTERS

FC ADAPTERS—Features/Specifications
Common to all FC Adapters

  • Ferrules—Precision machined zirconia
  • Universal threaded coupling
  • Available with or without bulkhead seal
  • Supports single and multi-mode fiber
  • Typical light loss < 0.5dB
  • 500 mate/demated cycles
  • Operating temperature: -67°F to 185°F
    (-55°C to 85°C) with 0.5dB maximum insertion loss
  • Pressure—1000 psig pressure with no signs of leakage
  • Bulkhead thickness—.100in to .125in
  • When used as a feedthrough one side must remain connected to maintain seal integrity

Specific—Features/Specifications
FC-DRY™—Body material: Nickel-plated brass
FC-DRY™ HP—Body material: 316 series stainless steel

 

ST ADAPTERS

ST ADAPTERS—Features/Specifications
Common to all ST Adapters

  • Ferrules—Precision machined zirconia
  • Available with or without bulkhead seal
  • Supports single and multi-mode fiber
  • Typical light loss < 0.5dB
  • 500 mate/demated cycles
  • Operating temperature; -67°F to 185°F
    (-55°C to 85°C) with 0.5dB maximum insertion loss
  • Pressure—1000 psig pressure with no signs of leakage
  • Bulkhead thickness—.100in to .225in
  • When used as a feedthrough one side must remain connected to maintain seal integrity

Specific—Features/Specifications
ST-DRY®—Body material: Nickel-plated brass
ST-DRY® HP—Body material: 316 series stainless steel

 

Statements and recommendations are based on our experience and knowledge of typical applications for this product and shall not constitute a guarantee or warranty of performance nor a modification or alteration of our standard product warranty which shall be applicable to such products. To ensure hermeticity and environmentally sealed connections that utilize a Greene Tweed adapter and/or feedthrough it is IMPORTANT that you use only connectivity products from Greene Tweed. The performance of the connector within a given assembly can produce varying results.

Fiber Optics for Data Transmission

Greene Tweed has acquired Lancer Systems’ product portfolio of fiber optic solutions and related intellectual property.

Lancer fiber optic connector products are specified by leading oil and gas service companies for use in wellhead outlets and are used in other critical applications, such as rotary joints in wind turbines. The acquisition included Lancer’s Fiber Optic Extreme®, an optical connection system that ensures data transmission when exposed to extreme pressures (up to 25,000 psi) and temperatures (up to 175°C/347°F).

Please contact your Greene Tweed salesperson today for more information here.

 

St Adapter


;