FC FEEDTHROUGHS

FC Series PBF (Permanent Bulkhead Feedthrough)—Features/Specifications
Common to all FC Permanent Bulkhead Feedthroughs (PBF)

  • Ferrules—Precision machined zirconia
  • Body Material—316 series stainless steel
  • Universal threaded coupling
  • Supports single and multi-mode fiber
  • Typical light loss < 1dB
  • 500 Mate/Demated cycles
  • Operating Temperature: -40°F to 185°F (-40°C to 85°C) with 0.5dB maximum insertion loss
  • Waterproof—100% leak tested
  • Pressure—1000 psig pressure with no signs of leakage
  • Hermetically sealed with or without connector attached, with no detectable leaks at 1×10-9 cc of helium / sec with a permeability rate of 1 X 10-7 cc of helium/sec.

Specific—Features/Specifications

  • FC-DRY™ HP PBF Short
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – .395 in
  • FC-DRY™ HP PBF
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – 1.000 in
  • FC-DRY™ HP PBF Right Angle
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – .550 in

ST FEEDTHROUGHS

ST Series PBF (Permanent Bulkhead Feedthrough)—Features/Specifications
Common to all FC Permanent Bulkhead Feedthroughs (PBF)

  • Ferrules—Precision machined zirconia
  • Body Material—316 series stainless steel
  • Supports single and multi-mode fiber
  • Typical light loss < 1dB
  • 500 mate/demated cycles
  • Operating temperature: -40°F to 185°F
    (-40°C to 85°C) with 0.5dB maximum insertion loss
  • Waterproof—100% leak tested
  • Pressure—1000 psig pressure with no signs of leakage
  • Hermetically sealed with or without connector attached, with no detectable leaks at 1×10-9 cc of helium / sec with a permeability rate of 1 X 10-7 cc of helium/sec.

Specific—Features/Specifications

  • ST-DRY® HP PBF Short
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – .500 in
  • ST-DRY® HP PBF
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – 1.125 in
  • ST-DRY® HP PBF Right Angle
    – Minimum Bulkhead Thickness – .125 in
    – Maximum Bulkhead Thickness – .590 in

 

Statements and recommendations are based on our experience and knowledge of typical applications for this product and shall not constitute a guarantee or warranty of performance nor a modification or alteration of our standard product warranty which shall be applicable to such products. To ensure hermeticity and environmentally sealed connections that utilize a Greene Tweed adapter and/or feedthrough it is IMPORTANT that you use only connectivity products from Greene Tweed. The performance of the connector within a given assembly can produce varying results.

Fiber Optics for Data Transmission

Greene Tweed has acquired Lancer Systems’ product portfolio of fiber optic solutions and related intellectual property.

Lancer fiber optic connector products are specified by leading oil and gas service companies for use in wellhead outlets and are used in other critical applications, such as rotary joints in wind turbines. The acquisition included Lancer’s Fiber Optic Extreme®, an optical connection system that ensures data transmission when exposed to extreme pressures (up to 25,000 psi) and temperatures (up to 175°C/347°F).

Please contact your Greene Tweed salesperson today for more information here.

Fc Dry Hp Feedthrough


;