« BACK TO Valves

Arlon® 1330

Lubricated Polyketone

THERMOPLASTIC COMPOSITE

Arlon® 1330 is a modified version of Arlon 1000. This “softer” material demonstrates lower flexural modulus values and reduced friction values. Because of Arlon 1330’s reduced modulus, it is often the material of choice for valve seats and sealing components.

AVAILABILITY

Arlon 1330 is available in custom injection-molded shapes, rods to 1 in. (2.54 cm) diameter, tubes from .5 in. (1.3 cm) ID to 6 in.
(15.2 cm) OD, discs to 17 in. (43.18 cm) diameter and rings to 16 in.(40.64 cm) diameter.

TYPICAL PROPERTIES

arlon1330-lubricated-polyketone-table1

arlon1330-lubricated-polyketone-image1


;